Advanced construction work requires the use of not only the right equipment, but also the connection of plumbing, without which the sewer system will not work efficiently. What is needed to install plumbing equipment?
Building a house involves a number of works that need to be done in a certain order. It’s not just the design of the building that matters, but also how the other elements of the building, such as electricity and water, will be run. The connection of plumbing must be planned at the beginning of the creation of the project so that during the construction work you do not expose yourself to additional costs due to, for example, poorly fitting pipes.
Proper signage and lighting
Each construction site must be properly marked. It has a great influence on the safety of works. Therefore, it is worth putting up warning barriers in places of excavation, which are offered by every professional online road store. Halogen lights will also be useful, which will be perfect in winter, when darkness falls faster.
How to bring water to the construction site?
The first way is to dig a deep well. It is necessary to choose an appropriate pump – a deep well or a self-saturation pump. The former will work well for extracting water from deeper wells. However, you need to be sure to check the quality of water from this type of source.
Another solution is a water supply connection. In order to be able to install this, however, you need to obtain a special permit from the water utility. Remember that the formal process, as well as the construction of the connection itself, is lengthy. The work should be commissioned to people who are authorized to do so.
Special water containers can also be a temporary solution. They can hold many liters, but you have to keep in mind that water intake on the construction site is quite high and you may not be able to fill the tanks regularly.
Preparing the ground
Before connecting the water supply and sewage systems, it is necessary to prepare the ground properly. For this will be useful iglofitlry, which drain the water deposited in the foundations
Choice of pipes
The next stage is the selection of pipes for sewerage. Most often and most recommended are those made of plastic materials – they are not only lightweight, but also resistant to damage. In addition, they are easy to install.
You also need to choose the right class of stiffness. We distinguish classes:
- SN8 LITA
Copper pipes are used less often. Although they are resistant to e.g. corrosion and high temperatures or cracking, they have the disadvantage that they are more often subject to electromechanical corrosion. It is recommended to install them where the water is not too soft.
The third type is steel, which are distinguished by their high strength. However, they are not resistant to corrosion and quickly lose heat.
Seals and clamps
Pipe connection systems must also be properly secured. For this there are gaskets, the size of which you must choose depending on the width of the pipes. The way the pipes themselves are installed is also important. In places where more solid fastening is necessary it is worth to use clamps and holders. You can find them in Hydrotop store.
In order to properly connect plumbing on construction site, such parts as:
- hydraulic pipes
- hydraulic quick couplings
If you connect your plumbing correctly, you will enjoy quality plumbing for a long time. Don’t skimp on materials or on professionals – otherwise you may experience frequent breakdowns, which can be much more expensive than the original purchase of better components.